Comparison shot of Vulcan & VulcanHD Mould Cans. Both cans mould 9 inch moulds. The Vulcan on the left is smaller and more compact and...

We are often asked which vulcanising can to use. In General if you use the silicone discs the normal Vulcan is the one to use. If you use...

We have rationalised the range of casting discs that we offer. After much testing and mould making we have 2 main types of disc now...

Master moulds being spun on the spinbox. Moulds are silicone low temp and the metal is master metal which is high in tin content and...

Really teeny tiny 6mm figurines from sculpt through to cast masters. Think they turned out ok but still need a few tweaks. surprised how...

SB-VCHD90 Heavy Duty Vulcanising Mould Can for producing your own vulcanised organic or silicone rubber moulds up to 9 inch in diameter....

Another consignment on its way. Comprising SpinBox, Mould Making Starter Package, and 2 Boxes of Discs.

Model Paints Tools

Some moulds made using our equipment from start to finish. These are some 20mm WW2 figures from a new and rising figure company. Have to...

Part 2 Now available in pdf section

Part 1 now available in PDF section of site

These are a softer compound than the organic rubber discs and offer the ability to produce moulds much easier. Although more expensive we...

We are often asked for the items required to begin moulding and now offer a starter package to get you going. This set incudes all you...

We have recently increased our range of sprue formers to include the original reversible type and added a normal straight type and for...

Casting alloy 4 Very inexpensive lead-based casting alloy. Offers good fluidity with reasonable melting and casting temperatures....

As part of our desire to continually improve our products we are now upgrading the Spinbox Casting machines with the quick action nuts...

Saving up to 75-85% in time and effort.

We now have available quick release clamping thumb nuts. These can replace the standard thumb nuts and reduce the time and effort in...